How to Reset Ford F150 Door Code Without Factory Code

Looking for how to reset Ford F150 door code without factory code? This guide will walk you through the steps to take.

 

If you lose your key, every Ford F-150 vehicle comes with a code that you can enter on the door to get access to your car. There is a technique to retrieve the code if you don’t know it. Aside from that, we’ll look at how to reset the F150 door code without the factory code.

 

Resetting Ford F150 Door Code Without Factory Code: Possibilities Offered

Resetting the F150 door code without the factory code might provide you with several benefits. These include:

     Locking the Ford car door

     Unlocking the Ford car door

     Recalling positions

     Recalling seats

     Opening the Ford car trunk

     Erasing personal entry Ford code, and

     Programming personal entry Ford code

 

Steps for Resetting F150 Door Code Without Factory Code

You may reset several automobiles without needing a factory code. Some of these models include the Kuga, Focus, Fusion, Fiesta, Connect, Puma, and others are among them.

 

Follow the steps below to reset your F150 door code without a personal factory code:

 

     Use an internet generator to get a factory code.

     Press the first and second buttons. Wait for five seconds between each one

     Type in the new personal code you’ve decided to use henceforth.

     Press the first and second buttons once more. You should also wait for five seconds in between each one.

     The doors should automatically lock and unlock. This indicates that the process is finished and successful.

 

Unlocking or Locking the Doors

You must enter the five numbers from your own Ford code to resolve this issue. You must be careful not to push the buttons too quickly, otherwise, the process will not be completed correctly. Allow at least five seconds between each touch of two buttons.

 

The interior lamp will then shine. Your car’s doors will be unlocked in a matter of seconds. The procedure for locking the doors is the same, including entering the personal code, but you must hit buttons three and four in a five-second time difference at the end.

 

So, without a factory code, you can lock and unlock doors with the rest of your Ford keyless entry system.

 

To unlock the Ford trunk without the factory code, follow the steps above, enter the code you receive, and then hit the buttons five and six in the five-second interval.

 

Methods for Retrieving Factory Code in Ford F-150

Physical Print Locations

It may still be possible to obtain the code if you have lost one key or only have access to one key. First, search for a little sticker on the inside fuse panel with a five-digit number ending in a letter, such as 12345g; this is more common on newer vehicles and may not be present if you purchased an old vehicle. The glove box is the next place to go, and you can also try flipping through your car’s owner’s manual to see whether the code is stated there.

 

Regular Key

Insert the key into the ignition and hold it there for roughly 5 seconds (do not start the car). Turn off and remove the key after 4-5 seconds. Replace the first key in the ignition and turn it to the on position. The factory key code will appear on the instrument cluster display screen after a few seconds.

 

Smart Key

If your vehicle is equipped with a smart key, the procedure is slightly different. Depending on your car type, there is a unique position where you may place your key fob so that it is recognized by your vehicle. This can be found, for example, in the bottom of the cup holder in the center console on the most recent 2020 model.

 

Place the first key fob in the hole and press the start button to turn the vehicle on (do not start the vehicle), then press the start button again to turn the vehicle off after a few seconds. Remove the first key fob and replace it in the same hole with the second key fob. To restart the vehicle, hit the start button once more. On the instrument cluster screen, the factory code will be shown. Remember the code and only share it with individuals you can trust.

 

FAQs

How do I erase a personal keyless entry keypad code from my Ford?

     Enter the five-digit code provided by the manufacturer.

     Press 1•2 on the keypad and release after five seconds.

     Hold down the 1•2 button and release it after two seconds. You have five seconds after finishing step 2 to execute this.

     Now that all personal codes have been wiped, only the factory-set five-digit code will function.

 

Where is the 5-digit default keyless code on a Ford f150?

If you haven’t moved the owner’s wallet card, the 5 digit security code is normally in the glove compartment.

 

Can you find the keyless entry code by VIN?

The keyless entry code cannot be obtained using the vehicle identification number. You might be able to extract the actual key code and get a blank cut, though. The only issue is that your vehicle is a 98 model, which is Ford’s cutoff for how far back they go, so yours may or may not be available.

 

What is my door code?

The numeric code on the locks of the units to which you have access is your door code. The lock will unlock if you enter this code on the keypad of a lock that belongs to a unit you have access to. Your door code is personal to you and should never be shared.

 

How do I get a Ford door code with two keys?

Switch the ignition on for a few seconds after inserting a key into the ignition. Remove the key from the ignition and turn it off. Switch on the ignition by inserting the second key into the ignition. The factory-set code will appear in the instrument cluster above your steering wheel for a few seconds.

 

Wrapping Up

Please contact Damntools if you have any further questions regarding how you can reset Ford F150 door code without the factory code. We’ll be happy to answer any questions you have about this or any other routine maintenance item.

Click Here to Leave a Comment Below 0 comments