Pros and Cons of Cold Air Intake for your Car

Every body knows that the engine system is one of the most important parts in the vehicle, without it, the vehicle will not run. But since the engine run its job in the most critical condition, trouble with such is indeed normal to happen. There may be something wrong with the engine and the rest of its components.

The engine system is composed of many other components that work in converting the fuel into motion through mechanical means. And one of these components is the intake manifold. The intake manifold can be found between the carburetor and the cylinder head and is usually made of aluminum. On vehicles with multi-point engines, the inlet manifold holds the fuel injectors.

The intake manifold or inlet manifold is in charge to supply the fuel/air mixture to the cylinders. In other words, the inlet manifold works simultaneously with the cylinder head to be able to regulate the amount of air that enters your compression chamber. This process largely determines your car engine's power. Even a car component as small as an intake manifold is directly connected to the crate motor's output.

Now, as your intake manifold aged, it cracks, and will discharge coolant everywhere. The worst effect could be an overheated engine which could greatly affect the entire vehicle system.
So to avoid experiencing this trouble, make sure to replace this worn out manifold with a new one as soon as possible. 

Customizing Your Cold Air Intake

Cold air intake for cars is the process where cold air is distributed to the internal combustion of the vehicle when it is hot and releases hot air when the combustion is cold. This action helps the car to automatically adjust its temperature to help the engine not to overheat or to run out of power.

Although the cold air combusting apparatus in the car is easy to replace with, replacing it needs not to be a professional since all you need is a better understanding on what it could do, where is it found and how it would be replaced. To customize the cold air intake of your car, you will need to know the basic steps on how to remove, replace and position the old and the new generator.

Being familiar with the use of cold air intake of the car is also important. The driver, not only the car also benefits from this service. When the car is being used by improving gas mileage, no engine overheating and exact heat is distributed through out the car’s internal system making it easier to manipulate while driving. But, when customizing your own car’s engine, there are some risks that you should remember.

The tube to the cold air intake is prone to get wet that may lead to hydrolock. Hydrolock is the process where water gets into the engine to create steam and other malicious functions that can cause damage to the engine. It is therefore important that when you are placing the cold air intake yourself, make sure that it can be protected from outside wetness and proper lock installation should be thoroughly checked. An imbalance of the engine’s cold air intake can ruin your car’s performance and may cause serious problems to the driver and the engine internally or externally.

Things You Need To Know About Cold

Air Intake

Some car owners don’t know the basics of a cold air intake. What is its function how does it work and whether it is important or not. Here is an overview of the cold air intake:

How Cold Air Intake Works

According to, intake systems are composed of 3 parts which are the throttle body, air filter and mass flow sensor. Intake system attempts to draw some air passing a long plastic tube that leads to air filter housing. The air will then be mixed with your car’s fuel. The system will then deliver the air to the intake manifold that is supposed to supply the engine cylinders with the combination of air and fuel.

Throttle Body

Its function is to determine how much air can enter the combustion chamber. It is normally found between your car’s intake manifold and air filter box. The mass flow sensor is usually situated near the throttle body.

Air Filter

Air filter is very important to your car because it is where the engine of your car breathes. Engine requires a certain amount of air and fuel mixture before it will be able to run. All the air needed enters to the engine through its air filter. Filter also functions to filter dirt and other foreign objects that enter along with air. The filter avoids engine from getting damaged. Air filter is usually found in a compartment of your car’s throttle valve assembly when you open the hood of your car.

Mass Flow Sensor

It measures the mass of air that gets into fuel-injected combustion engine. There are two types of mass flow sensor, the hot wire which determines how much electrical current is able to flow past the circuit, and the vane meter comes with a flap that air pushes to flow into the engine compartment of the car.

Click Here to Leave a Comment Below 0 comments