How To Keep Car Memory When Changing Battery

Taking care of your car has changed a lot over the past few decades, with technology becoming increasingly more complex and confusing. One of the most notable examples of this comes in the form of car batteries, which used to be quite simple to fix; unhook and remove the old battery and replace it with a new one.

While this wasn’t something that people looked forward to doing, it was something that didn’t take too much time or effort.

However, because of the technological advancements in cars over the past decade or so, more and more cars have features that rely on these batteries being installed and running constantly.

With the resulting loss of powers to the computers, radios, and other equipment in the car comes the fact that settings being restored to their default stage. As a result, car owners have been increasingly finding that changing their car battery and keeping what can be called the car memory can be quite difficult.

As a result of this, an increasing amount of car owners have been looking for an efficient, affordable and easy way to change their car battery without losing this memory.

While you might expect that this process would be either difficult or confusing, it can be a lot more straightforward than you think. While there are a few different steps to take to ensure that this is done correctly, these can be quite simple and easy to follow.

Tips For Changing Your Car Battery Without Losing Car Memory

The first thing that needs to be done is ensuring that you have all the equipment needed to change the battery. While you would have already thought about the obvious tools that you may need, you’ll also need a memory saver battery.

These devices are exactly what they should like, and provides somewhat of a battery alternative while you’re changing the cars main power source. This is chiefly because they provide a consistent power source to your car for a short period of time, thus ensuring that your car won’t lose its power, and subsequently its memory.

Because of that, a memory saver battery can prove vital when it comes to saving your car’s memory. While these can come with a variety of different voltages, many people have recommended using a 9-volt battery as it may be the most effective.

Having said that, this may be something that can change depending on what type of car you have and how many electronics have been installed. With that in mind, you may want to look at a few different types before choosing which one is the best for you.

However, it should also be noted that you should buy these memory saver batteries new, as used or second-hand ones may not have a charge, or even only have a small one.

As a result, it’s battery-life may be significantly shorter than you’ll need. With that in mind, it’s better to be on the safe side. Furthermore, the majority of these devices are relatively affordable, so you won’t need to spend too much on them.

This device should then be plugged into either your accessory outlet or cigarette lighter before you remove the battery from your car. It’s also vital that you ensure the memory saver is working after it’s been plugged it; after all, there’s nothing worse than realizing you failed to plug it in properly at the start.

However, many of these devices do have a light feature that will let you know if its power is reaching the car; with that in mind, you should be able to get it plugged in and set up relatively easier. It should also be noted that you may need to switch the vehicle’s ignition switch to the accessory or “ACC” position; this will ensure that it’s effective and does what it’s supposed to.

While you’re getting set up, you should also ensure that you turn off as many of the accessories as possible before taking out the battery. After all, these memory saver batteries have a short battery-life, so you’ll be on a short time-frame. The best way to improve this length of time, however, is to ensure that everything is either off or on standby mode so that they use up only a minimal amount of battery.

The next step is to replace the battery itself, which can vary significantly depending on the model and brand. If you’ve changed your car battery before then, you’ll know what to expect. If you’re new to the process, however, this process normally includes the likes of removing a plastic cover, guards and perhaps a mounting bracket, each of which will need a certain tool.

Furthermore, you’ll then need to disconnect the battery’s negative cable before disconnecting the positive one. Then you’ll be able to remove the car’s original battery.

The next step is to install your car’s new battery, which you should do as quickly as possible. This is something relatively easy, as it’s essentially the same process as above in reverse. However, one thing you should always be aware of is that you should reconnect the positive cable before the negative one; doing otherwise could result in some issues.

On top of this, you should also ensure that everything is safely and properly secured and put back in place before you’re done. This includes re-installing anything you had to take out while removing the old battery.

After this, you should them remove the memory saver battery, turn on the ignition and ensure that your car is working properly. Should you have done everything right, then there should be no issues with your car, although if there are any, then you may need to have another look at your car’s battery.

As we mentioned above, changing your car battery with losing its memory is a relatively straightforward process. By following the steps above, you should have it done in no time, and there shouldn’t be any ill effects from the process. With this, you shouldn’t have to change your car’s settings again.

Click Now To Share!
Click Here to Leave a Comment Below 0 comments