Best LED Tail Lights for Jeep Wrangler Review 2021
Whether you need new tail lights to replace your old ones or you are simply looking to upgrade the look of your Jeep’s rear, it is easy to get confused amongst all the different options available in the market.
LEDs or Light Emitting Diodes are the hottest trends in Jeep lighting right now. In terms of both performance and durability, LEDs score way higher than the standard incandescent lights.
To help you find the best LED tail lights for Jeep Wrangler, we have prepared a list with our recommendations and a buying guide regarding LED taillights for Jeep Wrangler.
|J.W. Speaker 0347531 Model 279 J 12-24V DOT LED Jeep Tail Light Kit -...||506 Reviews||$308.17||Check on Amazon|
|Liteway Jeep Wrangler LED Tail Light & Smoke Lens 3rd Brake Light for...||93 Reviews||Check on Amazon|
|SUNPIE Smoked LED Tail Lights for 2007-2017 J eep Wrangler Brake...||712 Reviews||$69.99||Check on Amazon|
|DOT Approved 4D LED Tail Lights Compatible with 2007-2017 Jeep...||740 Reviews||$94.99||Check on Amazon|
|Upgraded LED Tail Lights Smoked Compatible with 07-18 Jeep Wrangler JK...||662 Reviews||$85.99||Check on Amazon|
|Xprite LED Third Brake Lights Tail Lights w/Smoke Lens High Mount Stop...||1,170 Reviews||$22.99||Check on Amazon|
|Xprite Bold Series Smoke Lens LED Tail Lights w/Red Brake Rear Light,...||555 Reviews||$69.99||Check on Amazon|
|JK Wrangler Tail Lights, JK Wrangler LED Tail Lights, Jk TailLight,Led...||385 Reviews||$59.99||Check on Amazon|
|SUNPIE Green LED Rock Lights Kits with 6 pods Lights for Road Truck...||1,418 Reviews||Check on Amazon|
10 Best LED Tail Lights for Jeep Wrangler Reviews
Here we have detailed reviews of the ten best LED tail lights in the market right now.
1. J.W. Speaker 279 J 12-24V DOT LED Jeep Tail Light
These great looking Jeep JK LED tail lights are very easy to install and provide great brightness. If you are in the market to give your Jeep’s rear end a nice new look, this one is the perfect choice for you.
Not only do these bad boys look super cool over the factory tail lights, but they are also a great upgrade in terms of quality and brightness.Installation of the lights onto the Jeep is quite easy and only a few minutes. You do need a small screwdriver and a couple of pliers for the resistor nuts and bolts.
The resistor comes pre-installed. A mount and some clips are included in the package to help with proper resistor attachment with the metal frame.While some users did note the reverse lights being not bright enough for their liking, this is just one of those things that entirely depend on your personal preferences.
Fitment of this thing is great, although some think they are slightly smaller than the OEM ones. While that is not really a big deal considering all the great aspects of this thing, it is just something we thought you might want to know beforehand.
- Plug and play installation
- One-of-a-kind contoured housing look
- Innovative Light Blade Technology
- Offers amazing brightness
2. Liteway Jeep Wrangler LED Tail Light & Smoke Lens
This one here is one of the best Jeep Wrangler LED tail lights in terms of both appearance and price point. These lights will dramatically improve the appearance of your Jeep Wrangler’s rear side, while also working much more effectively than the stock ones.
The lights boast 50000+ hours of lifespan. In terms of compatibility, they are made to fit all 2007 and later Jeep JK Wrangler models.While the packaging does not include any instructions, it is still quite easy to install with no cutting or splicing involved. You only need to screw in two screws per side, and that’s it.
A third brake light also comes with the package besides the two tail lights, though the build and look might not be of the same level. Still, it is indeed a bonus at this price.The fitment is great and snug with no gap left. So that is another plus side to keep in mind.
All in all, if you are looking for the best bang for your buck, this one might just be the one for you.
- Looks nice and is affordable
- Has more than 50000 hours of lifespan
- Waterproof (IP 67)
- Includes a third brake light
- Compatible with 2007 and later Jeep JK Wrangler models
3. SUNPIE Smoked LED Tail Lights
Besides the lights being bright, the SUNPIE Smoked LED Tail Lights are quite high-end in the looks department too. The finish on this thing is quite nice, too, and it looks flawless after installation. It is all around a great product at a great price.
Speaking of installation, it takes very little time to set it up and ready to go. Even though they recommend you get it installed professionally, you can just as easily install it by yourself at your own home.
The lights on it are quite bright,which is easy to see both during the day and at night, providing you with great visibility. Resistors are also pre-installed to eliminate any hyper flash.
Washing them is a breeze as they do not get scratched or fogged, which often occurs to many other lights of inferior quality.
Another plus side about this one is that it is weatherproof and has rectangular reflectors for security warning purposes. They also happen to have great customer service, which, of course, is always a great thing.
- Faster on/off response time
- Rectangle reflectors for security warning
- For US vehicles only
- Great performance
4. LX-LIGHT DOT Approved 4D LED Tail Lights
- NEW UPGRADE- Plug and play,no need to change the original car circuit wires. This tail light with reverse light, running light and brake light, using 4D lens for reverse light, more spot and safe.
- EMC BUILD IN- Solved the flicker issue,no need add load resistors anymore and easy to install compare with the old model.
Here comes another one of the best Jeep Wrangler LED tail lights on our list today. If you are looking for an almost flawless product with amazing brightness and quality, look no further.The reverse lights on these are very, very bright.
You can be certain that everyone around you can see when you are reversing without any doubt. And of course, you get the great visibility of your surroundings too that comes with the dazzling brightness.
Not only do these look amazing on the surface, but they are also of great quality too provided how well they hold up against heavy rain and pressure wash, so you shouldn’t have to worry about moisture accumulation or fogging with these on.
Installation is a simple plug and play, meaning you do not have to mess around much with the wires and everything. There are hyper flash resistors already integrated with the lights, so you don’t need to worry about that either.
The OSRAM LED chips used in these lights have strong penetration and are of advanced technology. These lights are actually claimed to be three times brighter than your stock lights, making it safer for you for on-road use.
- Self-install (plug-n-play)
- Uses OSRAM LED chips
- DOT and E-MARK approved
- No need to worry about moisture accumulation
5. LITE-WAY Upgraded Jeep Wrangler JK LED Tail Lights
- 100% Plug & Play: The upgraded LED tail lights are direct replacements compatible with Wrangler JK 2007-2018 without the necessity to change a screw, which makes installation a breeze.
- Smoked Gloss Finish: The smoked gloss finish is born to create a sense of luxury and secrecy for your Wrangler JK, something that the frosted glass fails to deliver.
These Jeep JK LED tail lights will help you to rock a nice clean look and are quite bright even in the daylight. If you are someone who is more into the aesthetic aspect of things rather than the technicals, here is one for you.
Installing these is super easy and quick, with no wire cuttings involved. They also come with built-in resistors meaning you won’t have to deal with any issues involving flickering.
If you often like taking matters into your own hands, you might find these lights interesting for the fact that you can rewire and readjust these to your own preferences as directedby the instructions.
Some users did report there weren’t any shift in the brightness when applying the brakes, which could potentially translate into the person behind you, not knowing whether you are braking or not. Though if you happen to have a third brake light, that is not going to be a problem at all.
- Waterproof rate: IP 68
- UV protection polycarbonate lenses
- Installation is a breeze
6. Xprite LED Third Brake Lights Tail Lights
- FEATURES: Xprite 3rd Brake Lights High Mount Stop Lamps Gives your car Incredible Visibility and Style. OEM Style LED is very Bright and has a Low Power Consumption.
- LED CHIP: Quick ON/OFF Response. High Brightness and Low Heat LED. The Lights Penetration More Stronger and Farther.Up to 50,000 Hours Life.
You can’t just make a list of the best Jeep Wrangler tail lights without including some of the great third brake lights available out there. The Xprite LED third brake light is one such light.This light offers great quality and near-perfect fitment at a very reasonable price. The brightness of the light is also great on this thing.
No need to worry about setup as it should take very little of your time. You won’t even need to remove the spare tire. Just be careful to pre-plan where you are going to fix it and do not over tighten the screws as cautioned by many of the users.
There are a few users who mentioned the fit not being snug enough, while others thought it’s nothing a quick little filling cannot fix.It is nevertheless a nice little upgrade from your factory third light at a very low price, which should be considered nothing less than an instant steal!
- Easy to install
- Low power consumption
- Will hold up well against rough weather
- IP Rate: IP 68
7. Xprite Bold Series Smoke Lens LED Tail Lights
- 【FEATURES】Newest Fantastic LED Tail Light Design w/ Turn Signal & Back Up Function, are Faster on/off Response Time for Driving Safety. - DOT APPROVED
- 【HIGH-QUALITY 】- Durable Black ABS Housing and PMMA Smoke Lens.Water-proof IP67,Shock-proof.
Here is another nice looking tail light that offers great value for your money. These are a great choice to upgrade the look of your Jeep at a reasonable cost while also not compromising with the quality.
To install these, simply pop out your old tail lights, and pop these on, using a small screwdriver and a flathead. You don’t need to splice or cut any wires. Just pay attention to the text on the lens to figure out which side goes where.
These lights come very well packaged,and once installed and illuminated, the lights are super bright and do their job well.
Though there seem to be a few complaints about the durability, the customer support system of this product is quite amazing.They are quick to respond and help solve any issues you might have in the future.
- DOT approved
- Low power consumption
- Quick and easy installation
- Comes at a reasonable price
- Brightness is more than satisfactory
8. FIREBUG Jeep Wrangler Tail Lights
- Feature：High p.Feature：High precision constant current driver chip give you low voltage protection,and the LED tail light integrates all function light on itself, it can used as a turn signal...
- High Quality: Our JK Wrangler Rear LED Light is made with durable ABS and Cree LED,High Performance OSRAM Led Chip are Brightness and More Low Power Consumption than Factory Bulbs. Over 50000 Hrs...
The Firebug Jeep Wrangler Tail Lights are very bright both at night and during the day. They are way brighter than the factory ones, which is obviously the point of upgrading the lights unless your main purpose is to customize the appearance of your car only.
Well, in that case too, these lights have got you covered. These have avery nice and clean appearance, giving your car’s rear that instant lift in the looks department.
It also doesn’t hurt that setting these up is also as easy as it gets because of its plug and play design. Get the old ones out, unplug them, plug these new ones in, put the screws back in and you are good to go.
Obviously, the lights being LED means the on/off response time is much faster than the old factory lights that the Jeeps come with. And the 50000+ hours of lifespan does not hurt either.
- Faster on/off response time
- Great look
- Super easy installation
- A lifespan of more than 50000 hours
9. GCD Jeep TJ CJ YJ Replacement Tail Lights
No products found.
These lights are advertised to be a brilliant and super bright addition to your Jeep's rear. They are three times brighter than the stock lights and look quite good as well.The package includes two lights, one for each side. While you do need to be able to do some wiring to install these, it is quite easy and does not take much time.
Keep in mind, though, that the lights do not come with a diagram to help with the wiring as far as we can tell. So you might need to do a little research before you proceed with the actual installation.
Lenses on this thing are impact resistant, which means a couple impacts here, and there should not do much harm to the lights. All in all, the only issue with these lights seems to be the installation process if you are not among the patient ones.
If you do not mind the extra effort, don’t hesitate to grab these lights as they are pretty great in all other aspects once you are done with the installation process.
- Super bright
- DOT & SEA approved
- Impact-resistant lenses
- Polycarbonate housing
10. SUNPIE LED Rock Light Kits
- SUNPIE ATV 4x4 Off-Road Truck LED Rock Light: Original Cree LED chip, More Brighter, Longer life span! This low profile LED light kits will boost your night time driving efficiency as well as turn...
- PC lens Of LED Light thick reinforced, long-term use does not exist lens yellowing
If you are someone who just loves customizing their Jeep, you definitely need to get your hands on a set of these. With these on, you are sure to turn a lot of heads when you are out and about with your Jeep.
These lights are one of the best Jeep rock lights available in the market. Because the hub and the connectors are waterproof, these make for one perfect set of lighting kit for your beloved Jeep.
The package itself contains 6 LED pods,hubs, and a wire. Once installed, these are sure to increase your driving efficiency during the night time.These boast a waterproof rating of IP68 and can be attached to like anywhere.
You can use these as a brighter alternative to LED strips on the underside of your Jeep. Be sure to place them where the lights themselves are not visible, as they are quite bright. After reading the review, I hope now you understand why I claimed it as one of the best Jeep rock lights out there.
- Powerful Cree LED chips
- IP 68 waterproof seal system
- Anti-corrosion coating finish
How to Choose the Best One
If you are feeling confused about what factors to look out for when buying the tail lights for your Jeep Wrangler, well fret not. Here we are giving you a list of things for you to consider before buying the best tail lights for yourself:
This is one of the most important factors you should consider before buying your tail lights. Make sure to read the compatibility information in the description of the product and see if it is made to fit in your particular Jeep model.
- Daytime Brightness
Since you are probably going to be driving in the daytime as well as night time, be sure to check whether the lights are bright enough for the person behind to notice the lights in direct sunlight.
If they are not noticeable enough in the daylight, that could mean potential safety hazards for you as well as other riders on the road.
- Your Location
Pay attention to the certifications that the product has if you want to stay street legal, which you probably should. Check if the product complies with the standards set by the authorities where you live.
For instance, some lights do not follow the European Standard, while others might not be fit for use in the US.
Materials play a good part in the durability and quality of the product. If it’s not made of good quality material, it most probably is not going to last for too long.
Both the housing and the lens should be of good material. Cheap bad quality material can mean the light can get easily cracked or broken, which you most certainly do not want.
A good quality light should be sealed from the outside elements, meaning it should be dustproof, mud proof, and waterproof,especially if you are going to be driving through puddles or the likes.
Check the IP rating if it has any. For example, a rating of IP 67 means it has been tested to last under a meter deep water for half an hour, and it is dustproof.
Frequently Asked Questions
Below are the most commonly asked queries regarding LED tail lights for Jeep:
What are rock lights used for?
Rock lights are as much about being able to see your surroundings as it is about being seen. They are especially useful for nighttime activities when you want other riders to see you are there for your own safety theirs.
Of course, a large number of people use it purely for its aesthetic aspects too. They certainly do boost the look of your vehicle easily.
Is there anything I need to be careful about when installing a plug and play tail light?
Just make sure not to tighten the screws too much. Too much tightening can end up breaking the plastic around it.
What to do if the plug connectors do not stay in place?
Usually, the plug connectors should simply click in place. If they do not, you can try zip ties to keep them connected.
What to do if there's a gap left after installation?
Proper fitment should not leave a gap. Still, if it does, putting clear silicone on the crevices is known to seal them quite efficiently.
What does DOT/SEA approved mean?
DOT Stands for the Department of Transportation in the US. SEA stands for Society of Automotive Engineers. Being approved by DOT or SEA means it has been through a lot of standards and regulation checks to get the certification.
Choosing the perfect pair of tail lights for your Jeep can be quite daunting, especially if this is your first time buying them. But with our handy little buying guide by your side, I believe you can easily find the best LED tail lights for Jeep Wrangler.